Universal Engine Camshaft Cam Bearing Installation Insert Removal Kit Tool

  • Sale
  • Regular price $85.99
  • 7 available
Shipping calculated at checkout.


​​​​​​

Universal Engine Camshaft Cam Bearing Installation Insert Removal Kit Tool

 

Determine the size of the bearing I.D.

 

1.  First choose the correct expanding driver from the listing below. 

Place the expanding driver onto the expander assembly. 

Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly.  Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander

 

2.  Next place the nylon centering cone over the driving shaft. 

Now screw the expander assembly and driving washer from above on to the shaft.  The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.

 

3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first.  Be sure to tighten until snug in the bearing.

4.  Center the cone in first bearing housing and drive bearing out.

Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.

Repeat the
processes above until all bearings are removed.

 

NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.  

 

In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove,

or install each bearing.

 

1.  The expander assembly needs to be reduced before installing the new bearings.  Be sure
separation lines are aligned, referenced in the bearing removal section above.

 

2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of
the rear bearing housing. Now place the new bearing on the expanding driver

and tighten until the bearing is held firmly in place.

 

3.  With the nylon centering cone in place at the first housing drive the bearing into place.

Repeat this step until all bearings are driven except the front or first bearing.

To drive the number one bearing, you need to move to the rear of the engine. 

Again use the nylon centering cone in the  first
bearing housing at the rear of the block.

 

Packing Includes:
1. Expander Assembly
2. Short Driver Shaft
3. Driver Shaft Extension
4. Expanding Bearing Drivers
5. Nylon Centering Cone
6. Driver Washers
7. Replacement Rubber Sleeves
8.Storage case

 


 

 
Item Specifics
Brand east-auto
Manufacturer Part Number EA760104SU
Modified Item No
Warranty 1 Year
Condition New
Range 1.1 25" to 2.69" (28.58 - 68.3mm)
Type Camshaft Bearing Installation and Removal Tool Kit
Material Carbon steel
 
Payment

We accept Paypal only.

Shipping

We process and dispatch your purchase within 3 business day after payment clearance.

Please contact us if you have special requirements (combination of packaging etc.).

We offer free UPS Fedex from New Jersey.

Returns

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Buyer is responsible for the return cost.

Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.

We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.

Contact Us

Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

Please don't open case via ebay or paypal.

Please don't open any return request before contact us.

We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.

Features

Good quality, good operation.

Comes in a sealed package, ready to install.

East-auto

Your best choice

Universal Engine Camshaft Cam Bearing Installation Insert Removal Kit Tool

 

Determine the size of the bearing I.D.

 

1.  First choose the correct expanding driver from the listing below. 

Place the expanding driver onto the expander assembly. 

Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly.  Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander

 

2.  Next place the nylon centering cone over the driving shaft. 

Now screw the expander assembly and driving washer from above on to the shaft.  The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.

 

3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first.  Be sure to tighten until snug in the bearing.

4.  Center the cone in first bearing housing and drive bearing out.

Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.

Repeat the
processes above until all bearings are removed.

 

NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.  

 

In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove,

or install each bearing.

 

1.  The expander assembly needs to be reduced before installing the new bearings.  Be sure
separation lines are aligned, referenced in the bearing removal section above.

 

2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of
the rear bearing housing. Now place the new bearing on the expanding driver

and tighten until the bearing is held firmly in place.

 

3.  With the nylon centering cone in place at the first housing drive the bearing into place.

Repeat this step until all bearings are driven except the front or first bearing.

To drive the number one bearing, you need to move to the rear of the engine. 

Again use the nylon centering cone in the  first
bearing housing at the rear of the block.

 

Packing Includes:
1. Expander Assembly
2. Short Driver Shaft
3. Driver Shaft Extension
4. Expanding Bearing Drivers
5. Nylon Centering Cone
6. Driver Washers
7. Replacement Rubber Sleeves
8.Storage case

 


 

Item Specifics
Brand : east-auto
Manufacturer Part Number : EA760104SU
Modified Item : No
Warranty : 1 Year
Condition : New
Range : 1.1 25" to 2.69" (28.58 - 68.3mm)
Type : Camshaft Bearing Installation and Removal Tool Kit
Material : Carbon steel
 
Payment

We accept Paypal only.

Shipping

We process and dispatch your purchase within 3 business day after payment clearance.

Please contact us if you have special requirements (combination of packaging etc.).

We offer free UPS Fedex from New Jersey.

Returns

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Buyer is responsible for the return cost.

Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.

We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.

Contact Us

Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

Please don't open case via ebay or paypal.

Please don't open any return request before contact us.

We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.

Features

Good quality, good operation.

Comes in a sealed package, ready to install.