For 99-02 Chevy Silverado 00-06 Suburban Tahoe Headlights Assembly +Bumper Lamps

  • Sale
  • Regular price $96.99

Shop Category
Hot Item
New List Item
Help & Info
Payment Policy
Shipping Policy
Return Policy
About Us
For 99-02 Chevy Silverado 00-06 Suburban Tahoe Headlights Assembly +Bumper Lamps

A headlight (headlamp) is a lamp attached to the front of a vehicle to light the road ahead. Headlight performance has steadily improved throughout the automobile age, spurred by the great disparity between daytime and nighttime traffic fatalities. 

Headlights are one of the most important components of your vehicle; they allow you to see the road in front of you clearly during the night and in any bad weather that may arise. Our headlights upgrade the face of your vehicle with a clear style and extreme range.




1.100% Brand New
2.Placement on Vehicle:Front+Left+Right
3.High Beam Model: 9005 (Bulbs Not Included).
4.Low Beam Model: 9006  (Bulbs Not Included).
5.Color: Chrome Housing + Clear  Lens
6.Fitment Type:Direct Replacement
8.Applicable Regions:US
9.Professional Installation is Highly Recommended.
10.Installation Instruction is NOT Included.





99-02 Chevrolet Silverado 1500 2500 3500
01-02 Chevrolet Silverado 1500 HD 2500 HD
00-06 Chevrolet Suburban 1500 2500
00-06 Chevrolet Tahoe





100% Brand new in box!
Made by an approved and certified manufacturer to ensure quality and fitment.
Bulbs are not included. Please apply stock bulbs for installation. Direct replacement


Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.


Package Included: Left Side (Driver Side) + Right Side (Passenger Side)